Straight-through ultrasonic heat meter is a high-tech product that includes machinery, electronics and information technology. It has been successfully applied in many fields. Ultrasonic flowmeter heat meter can measure heat, cold energy, and cold heat at the same time. It is a meter that measures the flow rate by ultrasonic method and displays the heat energy released or absorbed by the water flowing through the heat exchange system.

Ultrasonic heat meter, including ultrasonic transducer assembly, measuring tube, is characterized in that it also includes a meter body, the left end of the meter body is installed with a ball valve and a ball valve motor connected to the control, including sealing ring, spring and spring seat, spring seat and ball valve elasticity The top contact is matched, the back of the ball valve is matched with a valve seat seal ring. A bracket is installed in the meter body. The middle part of the bracket is installed with a measuring tube. The left and right ends of the bracket are installed with reflectors. The meter body is buckled with the base of the meter box. Set up the ultrasonic transducer assembly, set the box base on the meter box base, and set the box base cover on the box base, set the heat meter probe, integrator, control circuit board, and M-bus collection on the control circuit board. The bus communication interface of the device and the M-bus collector.

Features:

1. It can be installed horizontally and vertically.

2. High temperature measurement accuracy and long service life.

3. It can measure heat, cold energy, and cold heat at the same time.

4. The flowmeter sends out a pulse signal proportional to the flow rate.

5. A pair of temperature sensors give out an analog signal indicating the temperature.

6. Calculate the amount of heat obtained by the heat exchange system using the cumulative formula.